Salarollpump

The Salarollpump is a unique patented peristaltic pumping system with extremely strong suction, high discharge pressure, solids handling capability and is safe to use in hazardous environments. It is a powerful and completely portable pumping system developed for the clean up of oil, hazardous chemicals and other high viscous polluted liquids.

• Oil skimmer off-loading.

• Beach clean up.

• Pumping hazardous chemicals.

• Pump extremely high viscous liquids, corrosive chemicals and debris laden liquids.

• Slurry removal from industrial and marine tanks.

• General liquid transfer.

Pump Unit
The system is a peristaltic type of suction and pressure pump that delivers a flow rate of 48 US gpm (11 m³/hr).
The heart of the system is a specially manufactured hose compressed by a wheel mounted on a rotating arm. The suction is developed when the hose with its own force returns to its original shape. Discharge is created by the force of the wheel moving the media. Both the pressure wheel and the inside of the pump housing have a lining of soft material that prevents solid particles from damaging the hose. A special grease lubrication system keeps the hose lubricated, reducing maintenance to a minimum.
The high vacuum and low speed of the pump enable it to pump most high viscous, polluted liquids and 1¹/₂" (40 mm) solids.

Salarollpump operation movie (597KB)

Drive Unit
The power pack for the Salarollpump is available with a gasoline, diesel engine or electric motor which drives a hydraulic pump. This powers the hydraulic motor mounted on the Salarollpump.
Pumping high viscous media is made easier by reducing the speed of the pump. The pump speed can be reduced by adjusting the hydraulic oil flow to three different output speeds, 15, 30 and 45 rpm. The power pack has two levers and a lever directional label that are used to set the hydraulic oil flow to one of three different values. The discharge pressure is not affected because the motor or engine is at full power.

Salarollpump Brochure PDF (1MB)