Oil Dispersant Spray
Systems
Megator oil spill dispersant spray systems are
portable light weight sets that can be quickly and easily mounted on
tugs, offshore supply vessels and other pollution control craft
responding to marine emergency oil spills situations.
The oil spill dispersant spray systems consists of a self priming
positive displacement pump, prime mover, dispersant flowmeter, relief valve and
interconnecting pipework, all mounted on an aluminium frame.
-
Open
sea or inshore duty
-
Suitable for below or above deck mounting
-
Diesel
or electric drive
-
Three
standard units
-
Will not be damaged if run with a dry suction
-
Self
priming with powerful suction performance
-
The
original Megator oil dispersant spray system was tested and approved
by the Warren Spring Laboratory
 
Oil dispersant consumption is appreciably reduced by using Megator oil
dispersant spray systems. With its outstanding self priming and
dry running capability, the Megator oil spill dispersant spray system
can be stopped after the first run through an oil slick and then simply
restarted for the second pass without the worry of loss of prime.
Megator oil spill dispersant spray systems do not require an additional
pump or eductor to pump diluted dispersant. This makes installation,
operation and maintenance of the unit extremely easy.
Used to pump either neat or dilute dispersant. Dispersant dilution gives
between 6% and 30% pumping ratio with sea water
Systems suitable for use with 50Hz eletric supply
| Unit |
Flowrate |
Power
rating |
Weight |
| Electric |
Diesel |
| lt/min |
US gpm |
hp |
lb |
lb |
| MegaSpray 125 |
40 |
10 |
1.5 |
143 |
176 |
| MegaSpray 150 |
82 |
22 |
2 |
176 |
242 |
| MegaSpray 200 |
142 |
37 |
4 |
253 |
286 |
Systems suitable for use with 60Hz eletric supply
| Unit |
Flowrate |
Power
rating |
Weight |
| Electric |
Diesel |
| lt/min |
US gpm |
hp |
lb |
lb |
| MegaSpray 125 |
47 |
12 |
1.5 |
143 |
176 |
| MegaSpray 150 |
100 |
26 |
2 |
176 |
242 |
| MegaSpray 200 |
167 |
44 |
4 |
253 |
286 |
Pump total head - 30 metres (100 ft) Pump specification
Megator L-type positive displacement, sliding-shoe pump with aluminum
casing, stainless steel rotor, port plate and mechanical seals.
Electric motors
IP56, T.E.F.C. to Lloyds regulations for below-decks service. Suitable
for 380-440 volts, 3 phase, 50-60Hz supply (other voltages available on
request).
Diesel engines
Single cylinder, vertical 4 cycle air cooled complete with fuel filter,
air cleaner exhaust muffler, fuel tank and recoil start.
Pipework
Unit supplied complete with interconnecting pipework, relief valve and
vacuum limiting valve fitted to pump. Dispersant suction fitted with
isolating and non-return valve. Suction and discharge fitted with
snaplock connections.
Dispersant flowmeter
PVDF paddle wheel flowmeter complete with 4 digit LCD
display.
Options
Purpose Built Sets
In addition to the oil spill dispersant spray systems detailed above,
Megator can design and supply purpose built sets to meet customers
individual specifications.
Oil Dispersant Systems Adobe Acrobat PDF format
(42KB) |
